Tips For Replacing a Window Handle
It is easy to change your window handle from the comfort of your home. Follow these guidelines to ensure a smooth and beautiful finish.
Begin by removing the screws to expose the screws within the uPVC window handle. Measure the spindle to make sure you're getting the correct size replacement.
1. Take a measurement of the length of the Spindle.
It's important that you ensure the correct size of the spindle when replacing the window handle. This is because it can determine how tight or loose the handle is, and whether it's able to lock properly in the frame of the window. The spindle is a steel shaft that connects the handle to the lock on the window frame. The spindle is available in either the standard 8mm cross-section for industry or older versions that measure 9mm. The modern industry standard is 8mm however this was not always the case, so when purchasing a new handle, it's essential to check the dimensions.
Remove the handle. This is easily done by turning the handle in the open position, and unwinding two screws that hold the handle in place (which are usually hidden behind plastic caps which will need to removed). After removing the handle, measure from the base of the handle to the end of the spindle. This will provide you with the measurements you need to buy a new one.
There are many options to consider when choosing a new window handle from sleek chrome that can fit into modern homes to traditional burnished brass that looks wonderful in restored Georgian rooms, or even the more traditional Tudor cottages with curled monkey tail latches! The options are endless but the most important thing is to select a style that is suitable for your home.
Espag handles are typically installed to uPVC windows and are always identical in size, with 43mm centres (2 fixings). Cockspur handles vary between 58mm and 62mm however luckily there are replacements available for both sizes. Cadenza window handles have an entirely different dimension because they have an angled blade which operates the multi-point lock mechanism within the window.
When choosing a window handle take into consideration the hand you use to open your door. Inline espag handles can be used for left or right-handed windows. Cranked window handles are only compatible on windows that open in a single direction.
2. Take the handle off
A window handle that has fallen out can be a hassle, regardless of regardless of whether the handle has been damaged or worn out. The good news is, you can replace the uPVC handle by yourself. You'll need only the most basic hand tools as well as some time to complete the process.
You must first open the window, and ensure that it is not locked. Then, remove the screw caps holding the handle in place. Once these caps are removed, you are able working on removing the handle itself.
The handle itself is attached to a spindle in the window frame. Depending on the kind it is held in place by a screw or a pin. The most popular handles are the inline Espagnolette and cockspur handles. Both types of handles can be found on casement windows, including aluminium ones. They can be locked using keys to prevent the opening of the window from outside or by locking them by turning the handle clockwise.
To remove the handle, you will need a flat-bladed screwdriver. After the clip has been released, the handle should be able to slide off the spindle. When the handle is removed, you will be required to measure the length of the spindle and ensure that your new handle is compatible with this size.
Once you've determined the proper size for the handle, screw it into place. You will need to ensure that the new handle is securely secured and that it is turning in the correct way (clockwise for open and counterclockwise for closed). It is essential to ensure that the handle hasn't been installed upside down.
Replace the cap screws. Once you have done this you can test the handle to ensure that it works properly. You should also test the locking mechanism by moving the handle to the locked position and then back again.
3. Take the Screws off
A uPVC handle is a crucial part of any house and is the first thing to show signs of wear or damage. This could be due to natural causes or from frequent use, and sometimes malicious damage caused by opportunistic criminals who may wish to open a locked window and gain entry to your property. A simple replacement can solve the problem and prevent it from happening again.
uPVC handles may also be difficult to remove when the locking mechanisms are not functioning properly. It's usually possible to resolve the problem by replacing the multipoint locking mechanism rather than the whole handle. This can help you save money.
After you have removed the handle, you'll need to remove the screws that were holding it in place. They are usually located on the inside face of the base of the handle. You may need to use an screwdriver to do this, and it's crucial that you don't over tighten as this can cause the handle to become loose.
You will then need to find the fixing screws or pins that keep the new handle in place. They're usually on the inside of the base of the handle. You will need a screwdriver to take them off. After they've been removed, you'll be required to replace the caps on the screws in the event that you want to do so, and then test the new handle to ensure it's working properly.
Install repairmywindowsanddoors by adjusting the spindle with the window's cutout mechanism. Then screw it in. Make sure that the handle is in the open position and that the screws are tightly fixed before replacing the screws' covers, in the event that you want to do so. After this is done, you're done and can enjoy your newly replaced window handle. This should help you avoid costly window and door replacements in the near future. If you'd like more assistance in this, or any other aspect of your uPVC windows do not hesitate to contact us.
4. Install the New Handle
The process of replacing a broken window handle or updating it is easy and can be completed within just a few steps. The key is to identify the type of handle, take measurements of its spindle and know what tools you'll need to complete the job. Always consider security when working with windows and tools. It is also essential to be patient and follow the steps carefully to ensure that you have a functional handle that is safe to use.
To begin, locate the screws that hold the window handle in place. Remove these while holding the handle firmly to prevent it from falling and causing injury. Once the screws are removed, they can be placed in a secure location to be replaced in the future.
After the handle that was used previously was removed, you are now able to begin to install the new one. The handle needs to be fitted perfectly in order to function correctly and hold the window in its closed position. The next step is to slide the metal square to the back of the handle into the hole in your window mechanism, ensuring that it fits securely.
After your new handle is in place, the last thing to do is to replace the caps on the screws and test it to make sure it works. If you're not happy with the results, or the window doesn't shut or open properly, call our experts for assistance.
Most UK homes have uPVC Windows. As such, many will need to be changed at some point because of damage or wear. Anyone with some DIY experience can easily accomplish the task. The most important aspect in the success of the process is ensuring that you're using a replacement handle that is compatible with your window's size and design. Contact our team if you are unsure about the type of handle you need. They will be able guide you through all the options.